Colour Coding; Symbols On The Machine; Proper Use - Kärcher HD 9/21 G Manual Del Usuario

Ocultar thumbs Ver también para HD 9/21 G:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 64
22 High pressure pump
23 Oil dip (engine)
24 Motor
25 Engine switch
26 High pressure connection
27 Fuel tank
28 Star knob push handle
29 Trigger gun storage clip
30 Hose switch
31 Push handle
A Union joint
B Filter pot
C O ring
D Filter inlay

Colour coding

– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.

Symbols on the machine

High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at persons, animals,
live electrical equipment or at the appliance
itself.
Risk of burns! Beware of hot
components.
Risk of poisoning! Do not
breathe in the exhaust fumes.
Petrol is highly prone to
fire hazards and is ex-
plosive.
Before tanking up,
switch off the motor and
allow it to cool down.
The motor exhaust gas
contains poisonous car-
bon monoxide.
Do not run the engine in
closed areas.
According to applicable regula-
tions, the appliance must never be
used on the drinking water net
without a system separator. A suit-
able system separator by KÄRCHER or al-
ternatively a system separator according to
EN 12729 type BA must be used.
Water that was flowing through a system
separator is considered non-drinkable.
High pressure cleaner to clean: Machines,
Vehicles, Structures, Tools, Facades, Ter-
races, Gardening tools, etc.
– Cleaning using low pressure jet and de-
tergent (for e.g. for cleaning machines,
cars, buildings, tools),
– For cleaning using high pressure jet
without detergent (for e.g. for cleaning
facades, terraces, garden appliances).
– For stubborn dirt, we recommend the
use of the dirt blaster as a special ac-
cessory.
DANGER
Risk of injury! Follow the respective safety
regulations when operating at gas stations
or other dangerous areas.
Please do not let mineral oil contaminated
waste water reach soil, water or the sew-
age system. Perform engine cleaning and
bottom cleaning therefore only on speci-
fied places with an oil trap.
Quality requirements for water:
ATTENTION
Only clean water may be used as high
pressure medium. Impurities will lead to in-
creased wear and tear or formation of de-
posits in the appliance.
If recycled water is used, the following limit
values must not be exceeded.
EN
– 2
Do not fill up when the
motor is running.
Do not smoke during
fueling.
Do not fill up directly
from the can; use a fun-
nel or suitable container.

Proper use

17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hd 9/23 g1.810-252

Tabla de contenido