Descargar Imprimir esta página

Pioneer PDP-V402E Manual De Instrucciones página 24

Publicidad

HOW TO ADJUST PICTURE QUALITY
COMMENT REGLER LA QUALITE DE L'IMAGE
EINSTELLEN DER BILDQUALITÄT
Remote control
Commande à distance
Fernbedienung
SET
P I CTURE PARAMETER
Main unit
Unité principale
Hauptgerät
SET
Remote control
1
Commande à distance
Fernbedienung
P I CTURE PARAMETER
Main unit
Unité principale
Hauptgerät
2
ADJUST
P I CTURE PARAMETER
T I NT
• Only in the NTSC mode
• Uniquement en mode NTSC.
• Nur im NTSC-Betrieb.
Remote control
Commande à distance
Fernbedienung
MENU
• Returns to the normal
screen.
• Ë Retour à l'écran normal
Main unit
• Zurück
Unité principale
Hauptgerät
Maske.
MENU
24
<ARE1348>
En/Fr/Ge
All manuals and user guides at all-guides.com
CONTRAST
: ADJ.
SET : EXIT
CONTRAST
: ADJ.
SET : EXIT
: ADJ.
SET : EXIT
zur
normalen
Finalize your choice.
Make adjustments for each item as follows:
CONTRAST .. Adjusts the contrast of the picture ac-
cording to the brightness of the envi-
ronment so that you can watch the pic-
ture easier.
BRIGHT ......... Adjusts the brightness of the picture so
that you can watch the darker parts of
the picture, (such as night scenes and
dark hair), easier.
COLOR .......... Adjusts the color of the picture as de-
sired. (Set it to a little lower position
than that you want, to obtain natural
pictures.)
TINT .............. Adjusts the tint of the picture so that
the face color looks natural.
(Possible to adjust when the NTSC sig-
nal is inputted.)
SHARPNESS Normally set to their center values. But
if you want images to be displayed in
softer tones, adjust it to the left from
the center position.
INIT ............... Returns the above picture settings to
their center values. *1
*1
When you select INIT. , the message on the right is
displayed. Select "YES" or "NO" by using the 2 or
3 button.
Selecting "YES" and pressing the SET button sets
back all picture quality settings to their default val-
ues.
When "NO" is selected, all settings will remain as
they are.
If "NO" has been selected,
SET:EXIT will be displayed here.
If "YES" has been selected,
SET:INIT will be displayed.
Adjust the picture quality concern-
ing the selected item.
1 In case of the items other than TINT:
2 In case of TINT:
To return to the step-2 screen, press the SET button.
Repeat Steps 2 through 4 to adjust the other items.
When you have completed the set-
ting, return to the normal screen.
P I CTURE PARAMETER
I N I T I AL I ZE?
YES
NO
SET : EX I T

Publicidad

Capítulos

loading