How To Clean; Important Safety Information - Therabody RecoveryAir Prime Manual

Superior, hygienic design
It's important to take proper care of your RecoveryAir Prime compression boots because the longer they
last, the longer you will feel the benefits. RecoveryAir Prime compression boots have non-porous medical
grade material that help fight bacteria and provide a resistant surface. Our internal overlapping chambers
provide a smooth surface to clean, this means no wiping under chamber flaps where bacteria can build up.
This also means, no smells.

How to Clean

Here are simple steps to cleaning your RecoveryAir Prime compression boots:
1. Unzip the boots completely and lay them on a flat surface.
2. Take a disinfectant wipe or spray, and gently clean the inside of the boots. Avoid any oil based
cleaning product.
3. Once you have cleaned your garment, make sure to fully dry the surface by hanging them up or
wiping them down.
4. We also recommend you wipe down the exterior of the pump to reduce surface contaminants.
What it is and why it's important:
We use medical-grade material covering the internal chamber to help reduce the potential for microbial
growth and moisture retention. Whether you are an individual, or a clinic, our boots are designed to help
limit the potential for bacterial transmission.

Important Safety Information

Read all instructions before using the RecoveryAir Prime Compression System for the first time
Warning
• This system is intended for use by people in good health. This system is not recommended for people who have heart problems,
or vascular problems, have a condition requiring the use of any medical device, or have any condition that may affect their normal
well-being.
• If you are, or may be, pregnant, consult with your physician before use.
• Do not use this system over insensitive or numb areas, or in the presence of poor circulation. Do not use if you have been
EN
5