Therabody RecoveryAir Prime Manual página 9

Important Safety Information
• While in use, place the pump on a horizontal firm surface only. Do not place the pump on a bed, blanket, mattress, pillow, or
soft furniture. Do not cover the pump.
• The equipment is to be installed and put into service according to the EMC information provided in Chapter 11 - EMC
Manufacturer Declarations.
• Portable and mobile RF communication equipment might affect the equipment.
• For indoor use only.
• Use only the DC power adapter provided with the pump.
• The massage sensation should be pleasant and comfortable. If you experience pain or discomfort during or after the
massage or if there is onset of bruising or irritation during or after the massage, discontinue use and consult your physician.
• Do not hand or machine wash. Surface wipe only.
• Do not allow liquid to get into the air inlets.
• Do not use bleach.
• Do not dry clean.
• Do not wring, iron, tumble, or force heat dry.
Labels
The following labels and symbols appear on the pump, garments and/or packaging.
Label Description
IP 22 Degree of protection against
ingress of water
Read instructions before use
Read instructions before use (for
China only)
Read instructions before use
Location Label
On pump base
On pump base
On pump base
On garment label
Description
Level of protection type BF
applied part
Class III equipment
(only in the EU per IEC60335-
2-32)
Equipment relying on
limitation of voltage to ex-
tra-low-voltage (ELV) values
as provision for basic protec-
tion and with no provision for
fault protection.
EN
Location
On pump base
On pump base
(only in the EU)
7