Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Resistance Measurement
Do not connect the meter to a source of voltage or current when the
selector switch is in the
result.
1. Shut off and lock out power. Make sure all capacitors are fully discharged. Voltage must
not be present.
2. Plug the black test lead into the COM terminal. Plug the red test lead into the V Ω
terminal.
3. Set the selector switch to
4. Press the function (blue) button to select resistance; the Ω will appear.
5. Connect the test lead tips together. Press REL ∆ to "zero" the meter.
6. Connect the test leads to the component or circuit and read the display.
10
All manuals and user guides at all-guides.com
position. Damage to the meter can
.
Publicidad
Tabla de contenido
