Sirius SLT962 Instrucciones De Uso Y De Montaje página 14

SLT962
FREE STANDING – FILTERING
VERSION INSTALLATION
Take the product out of the packaging and
place it on a suitable surface: we suggest to
use a soft material, such as a sponge or a
cloth .
Remove the metal grease filter by inserting a
hand tool or the tip of a knife in the specific
oval opening of the grease filter, FIG.1. Di-
sengage the filter from the safety cables.
After removing the grease filter, remove the
fixing screws found in the ceiling bracket, as
shown in Fig. 2.
Remove the covers from the air outlets, as
shown in Fig. 3.
Bring the ceiling bracket previously removed
close to the ceiling and mark the holes to drill
(See Fig. 4).
Drill the holes and then insert the plugs sup-
plied into the holes.
Place the bracket at the plugs, and secure it
by using the screws supplied .
Hang the appliance into the ceiling bracket
(fig. 2), then secure it with the linear screws
supplied, as shown in fig. 5.
Connect the appliance to the mains, using
the specific power cord. Fit the charcoal filter
in its seat, just above the metal grease filter.
Refit the metal grease filter .
Fit the round grids in the upper part of the
appliance, as shown in Fig. 6, then secure the
grids with the four screws supplied, as shown
in Fig. 7.
BUILT IN – SUCKING VERSION
INSTALLATION
Take the product out of the packaging and
place it on a suitable surface: we suggest to
use a soft material, such as a sponge or a
cloth.
Remove the grease filter by inserting a hand
tool or the tip of a knife in the specific oval
opening of the grease filter , FIG. 1. Disenga-
ge the filter from the safety cables.
After removing the grease filter, remove the
fixing screws found in the ceiling bracket, as
shown in Fig. 2.
You can choose one of the three air out- lets
shown in Fig. 3: fit the air outlet plastic flange
in the desired outlet; the remaining outlets
shall be closed with the specific metal caps ,
as shown in fig. 8.
A recess shall be created , where the applian-
ce will be placed, which shall have a round
opening of 700mm diameter and depth ran-
ging from 175mm to 275 mm.
THE RECESS SHALL BE MADE AFTER IN-
STALLING THE APPLIANCE AND ESPECIAL-
LY AFTER CONNECTING THE AIR OUTLET
PIPE.
The recess shall be provided with a socket
and a round pipe of 150mm diameter, or a
similar section, for the air outlet.
Bring the ceiling bracket previously removed
close to the ceiling and mark the holes to drill
( See fig. 4),
Drill the holes and then insert the plugs sup-
plied into the holes.
Place the bracket at the plugs, and secure it
by using the screws supplied.
Hang the appliance into the ceiling bracket
(fig. 2), then secure it with the linear screws
supplied, as shown in Fig. 5. It's possible to
adjust the ceiling bracket, according to the
recess to make.
Connect the appliance to the supply mains,
using the specific power cord. Connect the air
outlet pipe to the hood flange.
14
SLT962