Program Lock; Compliance - DJO Global CEFAR BASIC Manual De Instrucciones

PROGRAM LOCK

The stimulator can be locked to prevent changing of programs.
46
To activate/deactivate the program lock:
1. Select the program you want to lock/unlock, see section STEP-BY-STEP USE.
2. Press the PROGRAM button
onds.
3. Press the left INCREASE or DECREASE button
play when activating the program lock and "OFF" when deactivating it. (The button toggles between
ON and OFF).
4. Press PROGRAM button

COMPLIANCE

Compliance gives you the possibility to monitor the use of the stimulator:
1. Turn the stimulator ON.
2. Press the TIMER button
3. The left side of the display shows the usage time in hours and the right side in minutes. To reset the
usage time, press the right DECREASE button
4. Wait for 5 seconds or press TIMER button
5. The left side of the display shows the total usage time in hours and the right side in weeks. The total
usage time cannot be reset.
6. Wait for 5 seconds or press the TIMER button
AUTO AUTO
and the left DECREASE button
P S
AUTO AUTO
to finish the program lock setting.
S
P
and the right DECREASE button
AUTO AUTO
S
P
AUTO AUTO
S
P
AUTO
P
. "ON" is shown on the left side of the dis-
AUTO AUTO
S
P
simultaneously for 2 seconds.
for 2 seconds.
.
AUTO AUTO
S
P
to exit compliance mode.
AUTO
S
simultaneously for 2 sec-
AUTO AUTO
P S
AUTO AUTO
S
P