Projecting; Projecting The Picture On The Screen - Sony VPL-HS1 Manual De Instrucciones

Projecting

This section describes how to operate the projector to
view the picture from the equipment connected to the
projector. It also describes how to adjust the quality of
the picture to suit your taste.
Projecting the
Picture on the
Screen
SIDE
SHOT
+
–
VIDEO MEMORY
DYNAMIC STANDARD
USER 1
MENU
ENTER
14

Projecting the Picture on the Screen

GB
2
4
VOLUME
+
INPUT
MS SLIDE
–
7
APA
LIVING
USER 2 USER 3
OFF
RESET
1
Plug the AC power cord into a
wall outlet.
The ON/STANDBY indicator lights in red and
the projector goes into standby mode.
2
Press the [/1 (on/standby)
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of the
connected equipment.
4
Press INPUT repeatedly to
select the input you want to
project on the screen.
Display the indication of the input you want.
Example: To view the picture from the video
equipment connected to the VIDEO
INPUT jack.
INPUT
ON/
STANDBY
Lights in red.
ON/
STANDBY
Lights in green.
VIDEO 1