Power-Off Memory Function - Vortice MICROCOMFORT T Manual De Instrucciones

ENGLISH

Power-off memory function

1) Weekly time setting memory: The week, time period and temperature data set in the weekly timing are
memorized during power failure. When the power is turned on again, the default weekly timing is turned off. You
need to turn it on manually and then the previously set data will be displayed.
2)In weekly timing setting: The current week and time are not memorized, because the current reference time
and actual time may be different when the power is cut off, which will cause the weekly timing to work
abnormally. For example, the current time is 10:30 and the power-on time is 12:30 after the weekly timing is
turned off, i.e. 2H faster than the current time, it will cause the heater to execute in the weekly timing program
2H earlier than the actual time. Before turning on the weekly timing after power off, you must first calibrate the
current time to ensure that the settings in the weekly timing function properly
Use of remote control:
1. Open the battery cover at the bottom of the remote control, as shown (press the buckle on the battery cover
inward and pull it out).
2. Identify the polarity of the battery, and insert the battery into the battery slot, as shown.
3. Put the battery cover to the bottom of the remote control.
CR2032
3V
27