Backrest Upholstery; Footrest Supports - Invacare Alu Lite Manual Del Usuario

!
Always make sure that the backrest is properly locked
in place before the user settles down in the wheelchair to
prevent any injuries !

2.1.3 Backrest upholstery

Padded backrest it provides excellent daily comfort for the
user who does not need specific support for the upper body.
 In the event that the upholstered backrest slackens, ask for
a replacement from your Dealer.

2.1.4 Footrest supports

- Standard footrest supports (photo 2) they swing away during
transfers and can be removed during transport.
Operate lever (A) by pushing sideways and swivelling towards
outside. To return to the initial position, align the footrest
support it locks automatically.
A
1
All manuals and user guides at all-guides.com
1A
To remove the footrest support, simply pull up after
unlocking the assembly.
To refit it, brings the support up in the open position, align
the holes (B) on the side mounting and press on, while still in
the unlocked position.
- Footrests (photo 3) : the footplate can be lifted during
transfers, footrests are height adjustable.
Loosen the bolt (A) to adjust to the desired height, firmly
tighten the bolt after adjustment.
Straps for standard legrest : to ensure a good position of the
feet.
Note : the standard footrest supports and legrests are
mounted in pairs on the wheelchair; whenever you remove
them, remember that you have a right side and a left side !
!
Never lift the wheelchair by the footrest supports or
legrests !
Keep your fingers away from movable parts during folding,
disassembling or adjustment to prevent injuries !
A
2
A
3
15