Tire Pressure Reset; Suspension Level Calibration; Headlight Matching; Gearbox Matching - Thinkcar THINKTOOL Manual Del Usuario

www.mythinkcar.com

5.2.10 Tire pressure reset

When the car tire pressure fault indicator light is on, this function is to reset the tire
pressure and turn off the tire pressure fault indicator.
If the tire pressure is too low or leaks, replace or install tire pressure monitoring equipment,
and replace the tire. When the vehicle with a damaged tire pressure sensor and tire
pressure monitoring function has rotated its tires, the tire pressure reset must be carried
out after maintenance.

5.2.11 Suspension level calibration

This function can adjust the vehicle body height. When replacing the vehicle height sensor
or control module in the air suspension system or the vehicle level is wrong, this function
can adjust the vehicle height sensor for level calibration.

5.2.12 Headlight matching

This function can initialize the adaptive headlight system. This system can decide whether
to automatically turn on the headlights based on the ambient light intensity, monitor the
vehicle's driving speed, body posture, etc., and adjust the headlight lighting angle timely.

5.2.13 Gearbox matching

This function can complete the self-learning of the gearbox and improve the shift quality.
When the gearbox is disassembled or repaired (after some batteries are powered off), it
will cause shifting delay or car impact. At this time, this function is to make the gearbox
automatically compensate according to driving conditions, thus achieve more comfortable,
more ideal shift quality.

5.2.14 Sunroof initialization

This function can set the sunroof lock off, close in rain, memory function of sliding / tilting
sunroof, outside temperature threshold, etc.
5.3

TPMS monitoring

Activate and match the tire pressure sensor, study the diagnosis and monitor the tire
pressure.
26