Cameo OTOS H5 Manual De Usuario página 14

UP and DOWN – Select the menu items in the main menu (DMX address, operating mode, etc.)
and in the sub-menus using UP and DOWN. Change the status or value in a menu item, e.g. DMX
address.
ENTER – Press ENTER to access the menu level to make value or status changes, and to access
one of the sub-menus. Confirm value or status changes by pressing ENTER.
9
LOCK
10
11
11 RECESSED GRIPS
In addition to the two transport handles on the base of the unit, there are practical recessed grips
at the top of the inner sides of the two device arms.
14
9
Mechanical locking device used to prevent the rotation
of the head in the horizontal direction during transport.
UNLOCK
Disconnect the unit from the mains, move the head parallel
to the base (4 possible positions) and push the locking lever
in the direction of the pan rotation axis (LOCK) to lock it in
position. Unlock the device before startup (UNLOCK).
10
Mechanical locking device used to prevent rotation of the
head in the vertical direction during transport (7 possible
LOCK
positions). Disconnect the unit from the mains and slide the
locking lever in the direction of the tilt rotation axis, moving
the head of the unit vertically until one of the 7 locking
UNLOCK
positions is found and the locking lever engages (LOCK).
Unlock the device before startup (UNLOCK).
PAN LOCK
TILT LOCK
11