Starting Up The Device; Operation; Dry Vacuum Cleaning - Kärcher WD 1 Classic Manual De Usuario

This is used for cleaning hard sur-
faces.

Starting up the device

1. Plug the electrical cord into the out-
let.
2. Set the ON/OFF switch to the de-
sired position.
 Position "1 (ON)": The suction /
blowing function is activated.
 Position "0 (OFF)": The device is
switched off.
Note
When purchasing and installing filter
bags, pay attention to the current part
numbers.
Information on accessories and spare
parts can be found at www.kaerch-
er.com.

Dry vacuum cleaning

ATTENTION
Sucking cold ashes
Device damage
Only vacuum cold ash with an ash pre-
separator.
ATTENTION
Defective or wet non-woven filter
bag
Device damage
Before using, check the non-woven fil-
ter bag for damage, and replace it if
necessary. Only vacuum with a dry
non-woven filter.
English

Operation

11