Intended Use; Scope Of Delivery; Description Of The Device; Initial Startup - Kärcher BR 30/1 C Bp Manual Del Usuario

Ocultar thumbs Ver también para BR 30/1 C Bp:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

nished parquet, enamelled tiles or linoleum. ● Do not
use the device for cleaning carpets or carpeted floors.
● Do not guide the device over the floor grilles of con-
vection heating systems. The device cannot vacuum up
the escaping water when it is guided over a floor grille.
● Do not operate the device at temperatures below
0 °C. ● Only store the device indoors.
Electrical components
DANGER
● Do not immerse the device in wa-
ter. ● Never touch contacts or lines.
WARNING
● The appliance contains electrical
components - do not clean the appliance under running
water.
CAUTION
● Have repair work carried out by
the authorised customer service only.

Intended use

This device is suitable for commercial and industrial
use, e.g. in hotels, schools, hospitals, factories, shops,
offices and rental companies. Use the device only in ac-
cordance with the information in these operating in-
structions.
● The device may only be used for cleaning smooth
surfaces that are insensitive to water and polishing.
● The device is not suitable for cleaning frozen floors
(e.g. in cold stores).
● The device is not suitable for use in potentially ex-
plosive environments.

Scope of delivery

Check the contents for completeness when unpacking.
If any accessories are missing or in the event of any
shipping damage, please notify your dealer.

Description of the device

For the illustrations, refer to the folding sides.
Illustration A
Warning light
1
Boost function button
2
ON/OFF switch
3
Handle
4
Battery pack unlocking button
5
Battery mount
6
Handle bowl
7
Type plate
8
Fresh water filter
9
Fresh water tank
10
Lid handle
11
Cleaning brush
12
Cover
13
Locking flaps
14
Waste water bowl
15
Waste water tank
16
Sweep bins
17
Lock
18
Cover
19
Dosing head
20
Detergent CA 50 C (0.5 l round bottle)
21
Cleaning rollers (replacement)
22
Battery pack Battery Power+ 18/30 DW
23
Mains cable for quick charger
24
Quick charger Battery Power+ 18/60
25
Cleaning rollers
26
Battery pack charging
1. Charge the battery pack (see operating instructions
and safety instructions for the battery pack and the
charger).
Inserting the battery pack
1. Push the battery pack into the battery mount on the
device until the battery pack audibly latches into
place.
Illustration B
Cleaning and care agents
ATTENTION
Use of unsuitable detergents and care agents
The use of unsuitable detergents and care agents can
damage the device and loss of eligibility for warranty
claims.
Use only KÄRCHER detergents.
Take care to ensure the correct dosage.
Note
Use KÄRCHER detergent or care agents for floor clean-
ing as necessary.
 Observe the manufacturer's dosing quantity recom-
mendations when dosing with detergent or care
agents.
 To prevent foaming, fill the fresh water tank with wa-
ter first and the add the detergent or care agent.
 To prevent the tank from overflowing, be sure to
leave enough space for the detergent or care agent
when filling with water.
Filling the fresh water tank
1. Grasp the fresh water tank by the recessed grips at
the side and take it out of the device.
Illustration C
2. Open the tank cap.
Illustration D
3. Fill the fresh water tank with clean tap water
(max. 40 °C) up to the MAX marking at most. If de-
tergent is to be used, fill in less fresh water accord-
ingly.
4. Add KÄRCHER detergent or care agent to the fresh
water tank as required.
ATTENTION
Over- or underdosing of the detergent or care agent
Can result in poor cleaning results.
Observe the recommended dosage for the detergent
and care agents.
Note
For optimal cleaning and care results, we recommend
using only KÄRCHER products and the dosing head.
5. Unscrew the round bottle lock.
Illustration E
English

Initial startup

7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido