Emptying The Tank (M); Topping Up The Boiler Water Tank (L) - Lavor GV EGON VAC Manual Del Usuario

CAUTION! Before removing the tank, switch off the
appliance and unplug it.
• Disassemble the tank (M) (Fig. 52) as described in section
"Using steam and liquid suction simultaneously"
• Check the solids filter (R) and remove any deposits.
If steam or liquids have been vacuumed or if filtration
water has been used, rinse the internal part of the tank as
well as the filter assembly components with running
water.

12 TOPPING UP THE BOILER WATER TANK (L)

The boiler water tank (L) supplies the boiler through an
electronic level control; since this is an external tank, it
can be topped up any time.
• When distilled water runs out in the boiler water
tank:
1. the appliance beeps intermittently
2. the no distilled water level pilot light (G)
flashes.
3. the steam stops coming out.
To top up, proceed as follows:
• switch off the boiler switch (E)
• turn off the main switch (D)
• remove the cable from the socket
• remove the boiler water tank cap (C) (Fig. 53)
• fill the boiler water tank (L) with distilled water
• put on the boiler water tank cap (C).
EN

11 EMPTYING THE TANK (M)

M
– MAX
C
L
Fig. 52
Fig. 53
49