Programming And Start Up - Diamond ATLANTIS TM69 LED Manual De Usuario

PROGRAMMING SYSTEM TM69 LED

5. PROGRAMMING AND START UP

Menu / Confirmation
Manual regen. / Return
The water softener incorporates a fully automatic
valve, which makes it easily manageable for any
user. We will now program the equipment:
1. First, we will program the time on the device. The
illuminated lock signal will appear:
To unlock the valve, simply press the two indicated
buttons simultaneously for 5 seconds:
To access the programming of the valve, press the
menu / confirmation button:
Press the menu / confirmation button again to
change the time on the valve. The digit will blink to
select the hour. Using the up / down buttons, we will
set the clock at the official local time.
We will then press the menu / confirmation again
and the minute digit will blink. We will modify the
digits using the same (up / down) buttons.
Once completed, we will press the menu /
confirmation button again and the valve will play a
sound. The display will stop blinking. The time value
will have been set correctly.
Next, we will program the regeneration mode of the
water softener. To do so, we will press the down
button to go to the next step of the menu.
The work mode is shown on the screen:
A-01: Delayed regeneration: The water softener will
remain on hold to regenerate at the scheduled time
Down
after the selected number of liters of water to be
descaled has passed.
Up
You can also select one of the following options:
A-02: Instant Regeneration: In this case, the
regeneration will occur once the number of liters of
water programmed has passed regardless of the
time.
A-03: Delayed Smart Regeneration: This option is
not valid for this water softener.
A-04: Delayed Smart Regeneration: This option is
not valid for this water softener.
Once we have selected our desired option, press
the menu / confirmation button and using the up /
down buttons, select the desired work mode.
Keep in mind that you can only select A-01 and
A-02. To confirm the selection, just press the menu /
confirmation button:
Next, we will define the measurement units of the
valve. To do so, we will press the download button
and we will set the measurement units displayed:
HU-01
Measurements in m
7
A - 0 1
HU-02
Measurements in gallons
3
EN
HU-03
Measurementsin liters