Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMING SYSTEM TM69 LCD
5. PROGRAMMING AND START-UP
ADJUSTMENT RANGE
ARTICLE
OF PARAMETERS
Time
00:00h - 23:59h
of the day
Times of
00:00h - 23:59h
regeneration
Hardness
50-999 mg/L
water from
entry
Note: After setting the water hardness of the water
softener, the display will show the total or remaining
treatment volume. The user can configure the
hardness of the water to adjust the volume of
treatment in each production cycle, for example:
reducing the hardness of the water can increase the
volume of the treatment a little.
Menú / Confirmación
Bajar
Regen. manual / Volver
Subir
ADJUSTMENTS
OF FABRIC
Current value
2:00h
500 mg/L
PROCESS OF
CONFIGURATION
When the lock symbol
appears on the screen, press
and hold the
and
buttons for 5 seconds until
lock symbol disappears.
1. Press the
button and the settings interface will
appear (image 1). The first option "Set Time of Day" will
be preselected automatically by the system.
2. Press the
button again to enter the setting menu for
the time of day. The time value (12) shown will flash.
Press
or
to adjust the time value (image 2).
3. Press the
button again to change the minute value
by blinking (30). Press
and
value.
4. Finally, press
and you will hear a sound that will
confirm the setting.
1. Press the
button and the settings interface will
appear (image 3). Select the option "Set Regen.Time" by
pressing the
and
buttons and then press the
button to access the menu.
The value of time "02" flashes. Press
the time value.
2. Press the
button again to change the value of the
minute that will appear flashing (00). Press
adjust the indicated value (image 4).
3. Finally, press
and you will hear a sound that will
confirm the setting.
1. Press the
button and the settings interface will
appear (image 5). Select the "Set Water Hardness"
option by pressing the
and
the
button to access the menu.
The hardness value "150" flashes. Press
the hardness value (image 6).
2. Finally, press
and you will hear a sound that will
confirm the setting.
11
the
to adjust the indicated
or
to adjust
and
to
buttons and then press
or
to adjust
EN
SYMBOL
(imagen 1)
(imagen 2)
(imagen 3)
(imagen 4)
(imagen 5)
(imagen 6)
Publicidad
Tabla de contenido
