Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMING SYSTEM TM69 LED
Select the option you want using the up / down
buttons and press the menu / confirmation key to
confirm the selection.
The next thing we have to configure is the time we
would like the regeneration to take place.
To do so, we will simply press the down button again
and the regeneration time will display. If you have
chosen option A-01 (delayed regeneration), this
option is usually set at 02:00 hours.
You can change this value by pressing the menu /
confirmation button. The digits corresponding to the
time will blink and we can then select the desired time
using the up / down buttons. Follow the same
process to select the minutes.
To complete the regeneration time, we simply confirm
by pressing the menu / confirmation button.
To configure the interval of backwashing between
regenerations, we press the down button again and
the interval of backwashing between regenerations
will appear. F-00 will appear, which is already
programmed.
F-00
We recommend not modifying this value. This option
indicates that the water softener will carry out a
backwash every time you perform a regeneration,
which is the most recommended option.
To configure the water volume, press the down key
again to program the water volume which will pass
through the regenerations:
HARDNESS
LITERS
13.200
10º
8.800
15º
6.600
20º
5.280
25º
4.400
30º
3.770
35º
40º
3.300
45º
2.930
50º
2.640
55º
2.400
60º
2.200
65º
2.030
70º
1.880
75º
1.760
80º
1.650
85º
1.550
90º
1.460
95º
1.380
1.320
100º
For example: If we have an inlet water at 50 ºF,
the water volume between regenerations will be
4,200 liters / 1,109 gallons / 4.20 m3 (depen-
ding on the selected measurement unit) as
indicated in the table.
Once the value is inserted, we confirm the selection
with the menu / confirmation button.
The following steps (indicated in the programmer
as 2, 3, 4 and 5) correspond to the 4
regeneration cycles. To continue, we will simple
press the down button sequentially.
Adapt the water softener to the following times
indicated on the table:
8
EN
GALLONS
m
3
3.486
13,20
2.324
8,80
1.743
6,60
1.394
5,20
1.162
4,40
995
3,77
871
3,30
773
2,93
697
2,64
633
2,40
581
2,20
536
2,03
496
1,88
464
1,76
435
1,65
1,55
409
385
1,46
364
1,38
348
1,32
Publicidad
Tabla de contenido
