Ricoh RN-MF2 Manual De Servicio página 186

3. Appendix: Troubleshooting Guide
Message
Memory Overflow
Memory Overflow
Memory Overflow
TX
Cancel
Misfeed: Bypass
Tray
20
Causes
• The data is too large or
complex to print.
• If you try to print a Locked
Print file stored in the
machine with the printer
driver's [Resolution] set to
[1200 × 600 dpi] or higher
in the [Print Quality] tab,
printing may be canceled
depending on the machine's
current memory usage.
• The machine's memory
reached capacity while
scanning the first page of the
original to store a fax job in
memory before transmission.
• The machine's memory
reached capacity while
sending a fax via LAN-Fax.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission mode.
Memory has reached capacity
while scanning the second or later
pages of the original when trying
to send a fax in Memory
Transmission mode.
Paper has been jammed in the
bypass tray.
Solutions
• Select [600 × 600 dpi] in
[Resolution] under [Printer Features]
to reduce the size of data. See User
Guide.
• If using the PCL6 printer driver, set
[Resolution] in [Print Quality] to [600
× 600 dpi]. If using the PostScript 3
printer driver, set [Print Quality:] in
[Graphics] to [600 × 600 dpi].
• Print or delete other Locked Print files
in the machine, and then print the
Locked Print file that the machine
failed to print. Alternately, resend the
Locked Print file to the machine with
[Resolution] set to [600 × 600 dpi],
and then print the Locked Print file.
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Remove the jammed paper. See the user's
guide.