Ricoh RN-MF2 Manual De Servicio página 188

3. Appendix: Troubleshooting Guide
Message
Replacement
Required: Fusing
Unit
Replacement
Required: Paper
Feed Roller
Replacement
Required: Print
Cartridge
Replacement
Required: Transfer
Roller
RX Comm. Error
Scan (NW)
Disconnected
Scan (USB)
Disconnected
Server Connection
Failed
Server Response
Error
Service call - X
22
Causes
The fusing unit is no longer usable,
and must be replaced.
The paper feed roller is no longer
usable, and must be replaced.
The machine has run out of toner.
The transfer roller is no longer
usable, and must be replaced.
A reception error occurred, and
the fax could not be received
correctly.
A scanned file could not be sent
because the Ethernet cable was
not connected properly.
The USB cable was disconnected
while scanning from a computer.
A scanned file could not be sent
because the destination could not
be reached.
An error occurred in
communication with the server
before beginning transmission.
A fatal hardware error has
occurred, and the machine cannot
function.
Solutions
Replace the fusing unit.
p.13 "Service Menu"
Replace the paper feed roller.
p.13 "Service Menu"
Replace the print cartridge. See the user's
guide.
Replace the transfer roller.
p.13 "Service Menu"
If possible, contact the sender of the fax
and ask them to resend it.
Reconnect the Ethernet cable properly,
and then try the operation again.
Reconnect the USB cable properly, and
then try the operation again.
Confirm that the destination is registered
correctly, and then try the operation again.
Confirm that the destination is registered
correctly, and then try the operation again.
If the problem could not be solved, contact
the network administrator.
p.15 "Service Call Conditions"