Changing The Preload Of The Shock; Changing The Shock Spring - SHERCO 250-300 SE/R 2013 Manual Del Propietário

CHanging THe PrelOad OF THe sHOCK

CHanging THe sHOCK sPring

Remove and clean the rear shock unit (
Select and install a spring based on your weight.
Spring Rate
Rider Weight (with equipment) : 65-75kg
Rider Weight (with equipment) : 75-85kg
Rider Weight (with equipment) : 85-95kg
Reinstall the shock.
Adjust the sag ( p.98)
☛
Adjust the static deflection (
All manuals and user guides at all-guides.com
Remove and clean the rear shock unit (
Loosen the locking nut
1
Loosen / tighten the adjusting nut
on the length required..
2
Indications
Tighten the locking nut
Reinstall the shock (
Recheck the settings (
p.108)
☛
p.98)
☛
.
1
Loosening Decreases the ove-
one turn rall length by 3mm.
Tightening Increases the overall
one turn length by 3mm.
.
1
p.109)
☛
p.98)
☛
48N/mm
51N/mm
54N/mm
p.108).
☛
depending
2
99