Dirt Devil M130000 Manual Del Propietário página 28

WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
PROBLEM POSSIBLE REASON
Cleaner won't run 1. Power cord not firmly plugged into outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4. Thermal Protector activated.
Cleaner won't pick
1. Dirt container not installed correctly.
up or low suction
2. Dirt container full.
3. Brushroll not on.
4. Dirty/clogged filter.
5. Dirt passage clogged.
6. Cleaning wand not installed correctly or misaligned.
1. Dirt container full.
Dust escaping
2. Dirt container not installed correctly.
from cleaner
3. Cleaning wand not installed correctly or misaligned.
4. Filter not installed completely.
Cleaner tools won't
1. Dirt passage clogged.
2. Dirt container full.
pick up
3. Filter clogged.
4. Dirt container not installed correctly.
Headlight not 1. Bulb burnt out.
working
2. Loose electrical wires.
Dirt container
1. Dirt container lid not aligned properly.
won't lock in place
2. Alignment tab not aligned.
Brushroll not 1. Brushes clogged.
rotating
2. Brushroll switch in OFF position.
3. Brushroll needs to be reset.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE. CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal
be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized Royal
code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)
14
All manuals and user guides at all-guides.com
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or breaker in home. Replace fuse/reset breaker.
3. Take to service center. To find nearest location, visit our website at www.dirtdevil.com or call
1-800-321-1134.
4. Allow cleaner to cool - Pg. 4.
1. Review dirt container removal and replacement - Pg. 10 & 11.
2. Empty dirt container - Pg. 10.
3. Turn on brushroll - Pg. 7.
4. Remove HEPA filter and clean - Pg. 10 &11.
5. Remove dirt container and cleaning wand then check the hose inlets for obstructions - Pg. 8 & 10.
6. Review cleaning wand installation - Pg. 6.
1. Empty dirt container - Pg. 10.
2. Review dirt container removal & replacement - Pg. 10 & 11.
3. Review cleaning wand installation - Pg. 6.
4. Review filter removal & replacement - Pg. 10 & 11.
1. Remove dirt container and cleaning wand then check hose inlets for obstructions - Pg.8 & 10.
2. Empty dirt container - Pg. 10.
3. Clean filter - Pg. 10.
4. Review dirt container removal and replacement - Pg. 10 & 11.
1. Replace bulb - Pg. 13.
2. Take to service center. To find nearest location, visit our website at www.dirtdevil.com or call
1-800-321-1134.
1. Remove and realign lid - Pg. 10 & 11.
2. Realign tab - Pg. 10 & 11.
1. Unplug unit. Remove debris from brushroll.
2. Slide brushroll ON/OFF switch to the ON position to activate brushes - Pg. 7.
3. Press brushroll reset button - Pg. 7.
Dealer or visit our website at www.dirtdevil.com. Costs of any transportation to and from any place of repair are to
®
® Dealer or retailer. Always identify your cleaner by the model number and manufacturing