Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
VACUUMING WITH ACCESSORIES
WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE ATTACHING ACCESSORIES.
NOTE: The three accessory parts may be used on the suction hose and cleaning wand.
1.
Bring the vacuum cleaner into its
vertical locking position.
NOTE: Switch brushroll off when
using the hose.
4.
HOSE
FASTENING
CLIP
RING
Straighten the hose and hook the
hose clip into the fastening ring to
prevent the upright vacuum cleaner
from toppling over during use.
8
All manuals and user guides at all-guides.com
2.
Press the release button to release
the cleaning wand. The cleaning
wand with built-in brush can be
used for cleaning surfaces.
5.
CREVICE
TOOL
POWER
BRUSH TOOL
To access tools, rock Power Brush
Tool away from cleaner. To remove
tools, grasp tool and pull up and out
of accessory clip.
3.
While pressing the hose release button,
pull out the suction hose to release
from cleaning wand.
6.
Attach the accessory of your
choice to the suction hose or
cleaning wand by firmly pushing
into place.
Publicidad
Tabla de contenido
