Publicidad
Idiomas disponibles
Idiomas disponibles
en
21
Starting and stopping the drill motor
Fig.15
(figure 15).
To start the drill motor with clockwise rota-
tion, press the button with the „
" sym-
100
%
l
85
%
bol. The drill motor starts with the highest
l
75
%
l
60
%
l
50
%
speed.
l
The last set speed is automatically stored
(Memory Function). To start the power tool
with the last set speed, press and hold the
100
%
button with the
symbol, and then press
l
85
%
l
75
%
l
60
%
the button with the
symbol.
l
50
%
l
To lower the speed, press the „
" sym-
bol.
To increase the speed, press the „
" sym-
bol.
Memory Function
To stop the drill motor, press the „
"
symbol.
Do not stop the drill motor during the drill-
ing procedure.
To start the drill motor with counterclock-
wise rotation, press the button with the
„
" symbol. The drill motor will run as
long as the button is pressed.
When the power supply is disconnected
while the drill motor is running (e.g. removal
of the battery), a protective circuit prevents
automatic restarting of the drill motor.
Restart the drill motor again.
In case of overload, the drill motor automat-
ically stops and must be restarted again.
Publicidad
