Before Startup - Kärcher BR 530 Ep Manual De Instrucciones

Operator console
1 Water quantity regulator
2 Switch of suction turbine

Before Startup

Fasten the pushing handle using the
four screws that have been delivered
and fit the protective caps.
Fasten the cable of the switch to the
slider using clips.
Place long lateral boards of the packag-
ing as a ramp next to the pallet.
Fix the ramp on the pallet with nails.
Place short boards as a support under-
neath the ramp.
Remove the wooden bars in front of the
wheels.
Raise the cleaning head and remove
the cartonage.
Push down the appliance through the
ramp from the pallet.
18
Unloading
Installing the Vacuum Bar
Insert the vacuum bar into the vacuum
bar suspension in such a manner that
the profiled sheet is positioned above
the suspension.
Tighten the cross-handles.
Insert the suction hose.
Installing the Brushes
BD 530 or BD 530 XL
The sweep brushes must be installed before
the initial operation (see "Maintenance work").
Caution
Risk of damage. Raise the vacuum bar be-
fore reversing.
Note
The appliance is designed and built in such
a way that the brush head is projecting to-
wards the right. This enables working in a
comfortable way close to the edges.
Filling in detergents
Caution
Risk of damage. Only use the recommended
detergents. With respect to different detergents
the operator bears the increased risk regarding
the operational safety and danger of accident.
Only use detergents that are free from sol-
vents, hydrochloric acid and hydrofluoric acid.
Follow the safety instructions for using deter-
gents.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
3
-
EN
Operation