Description Of Symbols - Silverline 991471 Manual De Instrucciones

EN
Introduction
Thank you for purchasing this Silverline product. This manual contains
information necessary for safe and effective operation of this product. This
product has unique features and, even if you are familiar with similar
products, it is necessary to read this manual carefully to ensure you fully
understand the instructions. Ensure all users of the product read and fully
understand this manual. Keep these instructions with the product for future
reference.
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Technical Abbreviations Key
V Volts
~, a.c.
Alternating current
A, mA Ampere, milli-Amp
Ah Amp hours (battery capacity)
n No load speed
0
Hz Hertz
⎓ d.c.
Direct current
W,kW Watt, kilowatt
-1
min Operations per minute
dB(A) Decibel sound level (A weighted)
2
m/s Metres per second squared (vibration magnitude)
Specification
Voltage:
No load speed:
Blade diameter:
Blade Kerf:
Blade bore diameter:
Supplied blade:
Bevel adjustment:
Cutting capacity at 90°:
Cutting capacity at 45°:
Dust Port Inner
Adaptor: Diameter
Outer
Diameter
Protection class:
Ingress protection:
Dimensions (L x W x H):
Weight:
Battery:
Cell type:
Voltage:
Capacity:
Charger:
Input power:
Output power:
Charging time:
Cord length:
Protection class:
Ingress protection:
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound & vibration information
Sound pressure L
PA
Sound power L
WA
Uncertainty K
Weighted Vibration
ah
Uncertainty K
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measure are necessary.
WARNING: Always wear ear protection where the sound level
exceeds 85dB(A) and limit the time of exposure if necessary. If sound levels
are uncomfortable, even with ear protection, stop using the tool
immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense
of touch, numbness, tingling and reduced ability to grip. Long-term
exposure can lead to a chronic condition. If necessary, limit the length of
time exposed to vibration and use anti-vibration gloves. Do not operate the
tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating
to vibration to calculate the duration and frequency of operating the tool.
silverlinetools.com
Original Instructions
-1
3800min
150mm
1.6mm
16mm
24T
O
0-45
48mm
36mm
31.5mm
35.5mm
IPX0
352 x 248 x 202mm
2.8 kg
Li-ion
18V⎓
4Ah
230V ~ 50Hz, 1.2A
22V⎓, 2.4A
2 hours
1.8m
IPX0
85.1 dB(A)
96.1 dB(A)
3dB
2
m/s
1.97
2
1.5 m/s
6