Configuration Of The Readjustments In Calibration - Baxtran ABD Manual De Instrucciones

7.7 CONFIGURATION OF THE SPEED OF THE CONVERTER|
1. Press the key
2. Press the key
• Mode 1 : Normal
• Mode 2: Fast
• Mode 3: Slow
3. Press the key
7.8 BLIND|
UF-8
It appears 0 on screen until the next division is selected. It starts to show values from that division.
Example:
Scale with e =2g
Blind in 5 divisions
It will show 0 until it reaches 25= 10 g, the first value it will show will be 12g
1. Press the key
2. Press the key
3. Press the key
7.9 CONFIGURATION OF GRAVITY|
1. Press the key
2.To change the value, press the key
the desired number.
3. Press the key

8. CONFIGURATION OF THE READJUSTMENTS IN CALIBRATION

1. When the user is in the normal mode of weighing, he must press the keys
on the display.
2. Press the keys
* ECF-1 CALIBRATION OF ZERO + WEIGHT
Press the key
Press the key
Press the keys
Press the key
Place the weight of calibration on the platform and press the key
steady.
* ECF-2 CALIBRATION OF ZERO
Press the key
Press the key
Press the key
to access the parameter.
to choose the desired mode:
to confirm.
to access the parameter
to select.
to confirm.
UF-9
to view the value of the actual gravity.
, next you must use the key
to confirm.
and to select the desired function:
, the display will show CALZ.
, to put the reading of the display to zero.
and to move the cursor.
to introduce the value of the weight of
, the display will show CALZ.
, to put the reading of the display to zero.
, to calibration.
UF-7
and to move the cursor and the key
and , the message
ECF-1, ECF-2 or ECF-3
calibration..
to do the calibration once the reading is
USER'S MANUAL ABD
to select
ECF-1
is going to appear
EN EN
37