Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.3. AUTO OFF SETUP
When scale is on and at zero and stable, long press
Then press
key to confirm and back to weighing mode.
Mode "on"
– scale will turn off after 10 minutes haven't been use; to be able to use the scale, needs to turn on the on/off
switch.
Mode "off"
- Function disable.
2.4. DIVISION SETUP
When scale is on and at zero and stable, long press
Then press
key to confirm and back to weighing mode.
2.5. CONFIGURATION OF DATE AND HOUR
The user must keep pressed at the same time the keys
Press the key
to view the Year, the Month, the Day, the Hour, the Minute, the Second, etc.
At this moment, press the key
Modification
mode: When the hour starts to blink, change data, and press the key
king mode.
THE DATA APPEAR LIKE THAT
1. Clk 24/12: (clock) to choose between the system 24-hours or the system 12-hours.
Press the key
to change the data.
2. APM A/P: (am pm) system 12-hours. "a" for the morning, "p" for the afternoon.
Press the key
to change the data.
In the system 24-hurs, it cannot be changed, showing "—".
3. YEA 00: (year) Introduce the number "12" for "2012". The biggest number is 99.
, the decimal digit is added through "1". Press the key
Press the key
4. Mon 00: (month) Introduce the month, "4" for April. The biggest number is 12.
, the decimal digit is added through "1". Press the key
Press the key
5. Dte 00: (day) Introduce the number of the day. The biggest number is 31.
, the decimal digit is added through "1". Press the key
Press the key
6. Hou 00: (hour) Introduce the hour, "8" for the 8:00. In the system 12-hours, the biggest number is 12. In the system 24-hours,
the biggest number is 23.
, the decimal digit is added through "1". Press the key
Press the key
7. Min 00: (minute) Introduce the minute, "30" for 30 minutes. The biggest number is 59.
, the decimal digit is added through "1". Press the key
Press the key
8. Sec 00: (second) Introduce the second "30" for 30 seconds. The biggest number is 59.
, the decimal digit is added through "1". Press the key
Press the key
9. Day 00: (day) Introduce the number of the day, . "0" for Sunday, "1" for Mondays... The biggest number is 6.
3. CALIBRATION
Setting up division, decimal point, max. capacity and calibration
Press and hold
key, then turn on the scale, to enter division setting.
Note: If the display shows C1 C3 press the key
key enter the auto off setup, use
key enter the division setup, use
and
, to go to the checking modes and modification ones.
before continuing.
USER'S MANUAL ARD
key to enable or disable.
key to select the divisions.
to go to the next parameter.
to save the changes and go to the chec-
, the other digit is added through "1".
, the other digit is added through "1".
, the other digit is added through "1".
, the other digit is added through "1".
, the other digit is added through "1".
, the other digit is added through "1".
EN
35
Publicidad
Tabla de contenido
