Safety Measures - DAB 750 Manual De Instrucciones

ENGLISH

1. SAFETY MEASURES

Before starting the pump, read this instruction booklet carefully and keep it in a safe place for
future reference. The pump must only be used for the purpose for which it was designed. For
safety reasons the pump must not be used by anyone under the age of 16 or by anyone who has
not read and understood the present instructions booklet.
the pump's handle.
When handling the pump, while it is connected to the electric power supply, you should avoid all
contact with water.
Never remove the plug by pulling on the power cord.
Before taking any action on the pump, always remove the plug from the power socket.
If the power supply cord has been damaged, it must be replaced by the manufacturer or its au-
thorized customer support service in order to avoid all risks.
The pump is equipped with a thermal overload safety device. In the event of any overheating of
the motor, this device automatically switches off the pump. The cooling time is roughly 15 to 20
minutes, then the pump automatically comes on again. If the overload cutout is tripped, it is es-
sential to identify and deal with the cause of the overheating. See Troubleshooting.
2. USE
Multi-impeller submersible pumps with buit-in electronics ideal for rain water and mains irrigation sy-
stems, for pumping water from tanks, ponds and wells and other applications that require high pressure.