Cleaning And Maintenance; Clean The Dust Collector And Filter - EUFY RoboVac G20 Manual Del Usuario

Cleaning and Maintenance

Before cleaning and maintaining, turn off the device and unplug the adapter.
For optimal performance, follow the instructions below to clean and maintain RoboVac
regularly. The cleaning / replacement frequency will depend on your RoboVac usage
habits.
Recommended Cleaning / Replacement Frequency
RoboVac Part Cleaning Frequency
Dust Collector After each use
Filter Once every week
(Twice a week if you have a pet)
Side Brush Once every month
Brush guard Once every month
Sensors Once every month
Charging Pins Once every month
Swivel Wheel Once every month

Clean the Dust Collector and Filter

1
Press the dust collector release button to pull the dust collector out.
28 EN
Replacement Frequency
-
Every 6 months or after every
50 rounds of cleaning
Every 3-6 months (or when
visibly worn)
Every 3-6 months (or when
visibly worn)
-
-
-
2
Open and empty the dust collector.
3
Remove the filter.
4 Clean the dust collector and filter with the cleaning brush.
EN 29