Spot Cleaning Mode; Select A Suction Power Level; Select Boostiq™ Feature; Use Your Robovac With Amazon Alexa / Google - EUFY RoboVac G20 Manual Del Usuario

• During cleaning, RoboVac will return to the Charging Base automatically
if the battery level becomes low. Once recharged, RoboVac will resume
to finish the remaining cleaning.
• By default, RoboVac starts in Auto cleaning mode when it is turned on.

Spot Cleaning Mode

You can select the Spot cleaning mode in the EufyHome app. In this mode, RoboVac
intensively cleans a specific area for 2 minutes in a spiral pattern, useful if there is a
concentrated area of dust or debris.
EufyHome

Select a Suction Power Level

In the EufyHome app, select a suction power level according to your needs:
• Quiet
• Standard (Default)
• Turbo
• Max
When RoboVac starts cleaning the next time, it will clean according to the
suction power level you previously selected.
26 EN
Select BoostIQ™ feature
In the EufyHome app, select the BoostIQ™ feature according to your needs. RoboVac
will automatically increase the suction power if it detects that stronger power is
needed to ensure the best clean. BoostIQ™ is ideal for cleaning thicker carpets and
hard-to-sweep messes, which will reduce the total cleaning time, but increase the
noise level. If the vacuuming noise caused by BoostIQ™ disturbs you, you can disable
this feature.

Use Your RoboVac with Amazon Alexa / Google

Assistant

Amazon Alexa or Google Assistant is a smart voice control device that enables you to
control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Charging Base to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Amazon Alexa-enabled device (i.e. Amazon Echo, Echo Dot and
Amazon Tap, Echo Show, Echo Spot) or a device enabled with the Google Assistant
(i.e. Google Home, Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart
device, and you have created an account.
To control RoboVac with Amazon Alexa or Google
Assistant
1. Open the EufyHome app and find "Smart Integrations" in the top left.
2. Follow the on-screen instructions to complete the setup.
• Currently this feature only supports English, German, French, and
Spanish. You could check regularly if more languages are supported at
https:/ /www.eufylife.com/support/.
EN 27