Specifications - EUFY RoboVac G20 Manual Del Usuario

Voice Prompt Cause and Solution
Wheels may be suspended in air. Move the device to
Error 7: Wheel Stuck
a flat surface and a new position close to the original
Hanging
position then try again.
Error 8: Low Battery, Low Battery; system will shut down. Charge the device
Shutting Down and try again.
Error 9: Magnetic Boundary
Device is too close to a strong magnetic field or strip.
Strip detected. Move device
Move the device to a different area and try again.
to a different area
- Open the battery compartment and check whether
the battery is connected and restart the device.
- Battery Temperature may be too high or low; wait
Error S1: Battery Error until the battery falls to normal temperatures before
usage (0 °C ~ 40 °C / 32 °F to 104 °F).
- If the issue persists, contact customer support for
help.
- Check whether the wheels are stuck or dust is
trapped inside before restarting the device.
Error S2: Wheel Module
Error
- If the issue persists, contact customer support for
help.
- Check whether the side brush is stuck in an unknown
object before restarting the device.
Error S3: Side Brush Error
- If the issue persists, contact customer support for
help.
- Check whether the fan blades are stuck in an
unknown object before restarting the device.
- Clean the dust bin and filter before restarting the
Error S4: Suction Fan Error
device.
- If the issue persists, contact customer support for
help.
- Remove and clean the roller brush, roller brush
connection, roller brush cover and suction inlet
Error S5: Rolling Brush Error.
before restarting the device.
Refer to Owner's Manual or
App for help
- If the issue persists, contact customer support for
help.
38 EN

Specifications

Battery Voltage
Power Consumption
Battery Type
Dust Collector Capacity
Charging Time
Input
Output
Input
Output
Frequency
RoboVac Charging Base Power Adapter
Side Brushes (x4) Additional Filter Cleaning Tool
Cable Ties (x5) Owner's Manual &
Other Documents
14.4 V
55 W
14.4 V
Li-ion 2600 mAh
600 ml
300 - 360 mins
19 V 0.6 A
19 V 0.6 A
100-240 V ~ 0.5 A Max
19 V 0.6 A
50/60 Hz
EN 39