Install The Hood - Broan Elite RM50000 Serie Manual Del Usuario

All manuals and user guides at all-guides.com
PREPARE THE HOOD
NON - DUCTED CONFIGURATION, cont'd.
8. Carefully place the lower decorative flue
into the recessed area of the range hood
top. Fig.7
9. Carefully slide the upper decorative flue
down inside the lower flue.
Note: air vents must be up. Fig.7
10.Secure the recirculation plenum to the
upper flue with (4) flat head screws. Fig.9

INSTALL THE HOOD

Note: at least two people will be required to
mount the hood.
1. Raise the hood into its
ADJUSTMENT
mounting position.
(3.9x9.5mm)
2. Plug the power cord into
the electric wall
MOUNTING
receptacle. Tuck excess
(4.8x38mm)
cord behind the flue.
3. Align the rectangular
opening on the back of
the hood with the
wall-mounting bracket.
Gently lower the hood until
it securely engages the
bracket. Fig.10
4. Level the hood.
Height adjustment screws provide
vertical adjustment.
Secure the hood with mounting screws
(4.8x38mm). Use drywall anchors,
provided, if wall studs or framing are not
available.
Secure with (2) mounting screws
(4.8x38mm). Use drywall anchors provided
if wall studs or framing are not available.
Fig.10
5. Raise the upper flue until its holes align
with holes in the flue mounting bracket
(located on ceiling). Fig.11
6. Secure the flue with (2) mounting screws
(3.9x9.5mm). Fig.11
HEIGHT
SCREWS
SCREWS
WITH SCREWS (3.9x9.5mm)
8
PLENUM
4 FLAT
HEAD
SCREWS
(3.4x15 mm)
UPPER
FLUE
fig.9
WALL FRAMING
MOUNTING
BRACKET
MOUNTING
SCREWS
(4.8x38mm)
RECTANGULAR
CUTOUT
fig.10
FASTEN FLUE TO
UPPER BRACKET
fig.11