Install The Hood - Broan best KER222 Manual Del Usuario

All manuals and user guides at all-guides.com
INSTALL MOUNTING
BRACKETS
1. Construct wood wall framing that is flush
with interior surface of wall studs.
Make sure:
a) the framing is centered over installation
location.
b) the height of the framing will allow the
mounting brackets to be secured to the
framing within the dimensions shown.
2. After wall surface is finished, secure
mounting brackets to framing using
dimensions shown.
VERSION 42"
33-15/16"= bottom of hood 24" above cooktop
39-15/16"= bottom of hood 30" above cooktop

INSTALL THE HOOD

1. Hang the hood from the brackets through
the rectangular cut-outs on the back of the
hood. Cut-outs are larger than the brackets
to allow for horizontal adjustment.
The bottom of the hood should be 24" to 30"
above the cooking surface.
2. Height adjustment screws provide vertical
adjustment.
3. Depth adjustment screws provide
horizontal adjustment.
4. Secure the hood with additional mounting
screws. Use drywall anchors, provided, if
wall studs or framing are not available.
FRAMING BEHIND DRYWALL
- 4 -
VERSION 90cm
FRAMING BEHIND DRYWALL
32-11/16"= bottom of hood 24" above cooktop
38-5/8"= bottom of hood 30" above cooktop
VERSION 48"
FRAMING BEHIND DRYWALL
34-7/16"= bottom of hood 24" above cooktop
40-7/16"= bottom of hood 30" above cooktop
ADDITIONAL
MOUNTING
SCREWS
WALL
FRAMING
DEPTH ADJUSTMENT
ADDITIONAL
MOUNTING
SCREWS
HEIGHT ADJUSTMENT SCREWS
RECTANGULAR
CUTOUTS
MOUNTING
BRACKETS
SCREWS