Operating The Pressure Washer; Holding And Controlling The Spray Gun; Squeezing And Locking The Spray Gun Trigger - Stihl RE 80.0 Manual De Instrucciones

10 Operating the pressure washer

► Set the rocker switch to position I.
9.2 Switching off the pressure
washer.
► Set the toggle switch to the 0 position.
10 Operating the pressure
washer
10.1 Holding and controlling the
spray gun
► Hold the spray gun by the handle with one
hand, wrapping your thumb around the han‐
dle.
► Hold the spray lance firmly with your other
hand, wrapping your thumb around the spray
lance.
► Point the nozzle at the ground.
0458-001-9821-B
10.2 Squeezing and locking the
spray gun trigger
Pressing the spray gun trigger
► Move the retaining latch (1) to the
► Press and hold the trigger (2).
The high-pressure pump starts up automati‐
cally and water flows out of the nozzle.
Locking the spray gun trigger
► Release the trigger (2).
The high-pressure pump switches off automat‐
ically and water stops flowing out of the noz‐
zle. The high-pressure washer is still switched
on.
► Move the retaining latch (1) to the
10.3 Cleaning
According to the application, the following noz‐
zles can be used:
– Fan-jet nozzle: The fan-jet nozzle is designed
for cleaning large areas.
– Rotary nozzle: The rotary nozzle is designed
for removing stubborn dirt.
The user can work close up to the surface in
order to remove stubborn dirt.
The user can work at a distance when cleaning
any of the following surfaces:
– Painted surfaces
– Wooden surfaces
– Rubber surfaces
English
2
1
position.
2
1
position.
39