THERMEx Cyclone Manual De Instrucciones página 77

M 525231082215092021
Pause function. Activate the pause function by pressing the icon on the display.
The current cooking settings are paused and can be resumed by pressing the pause
icon again.
Locking function. Press and hold the lock icon to lock the display and deactivate the
option to set / adjust the heating settings. The lock function can be deactivated by
pressing the lock icon again.
Keep warm function. During the hold-warm functions, press in the area shown in
the illustration. When this function is activated, the cooking zone is kept warm as
follows:
96 ° C
70 ° C
44 ° C
The hold-warm function can be used for a maximum of 2 hours.
Timer function. The cooking time can be set using hours where a countdown
starts and after the end of hours the cooking zone switches off.
Press both "+" and "-" at the same time to activate the timer for the activated
cooking zone. Then set the timer to the desired time and the timer function will
start. The timer function can be deactivated at any time by setting the timer to
"0".
Bridge function can be created between two cooking zones, so that a bridge is for-
med between the two zones, and the functionality can be controlled via one slider.
To activate the bridge between two cooking zones, press the slider panel for both
cooking zones simultaneously.
To deactivate the bridge again, press the slider for the individual cooking zones.
THERMEX CyCLONE 77