KTM 22112929044 Instrucciones De Montaje página 36

7 OPTIONAL
16
–
Mount and tighten screw
ded with the top case).
–
Key position 90° to the left to open.
–
Key position upward for locking.
500661-01
Removing the locking cylinder
–
Key position 90° to the left.
–
Pull up the locking device.
–
Remove screw
–
Push engaging plate
–
Remove the locking cylinder.
Guideline
The ignition key remains in the locking cylinder.
500662-01
Info
The steps are the same on both sides.
4 5
with washer
4 5
with washer and locking plate
bo
into the locking cylinder.
(both inclu-
3
.