Owner´s Manual
Drive Chain Slider
(Refer to the Safety Precautions on page 43.
Check the chain slider (1) for wear.
The chain slider must be replaced if it is worn to the
bottom of wear limit cutout (2).
For replacement, see your Honda dealer.
(2)
(1)
)
(1) Drive chain slider
(2) Cutout
Front and Rear Suspension Inspection
(Refer to the Safety Precautions on page 43.
1. Check the fork assembly by locking the front brake
and pumping the fork up and down vigorously.
Suspension action should be smooth and there
must be no oil leakage.
2. Swingarm bearings should be checked by pushing
hard against the side of the rear wheel while the
motorcycle is on a support block. Free play
indicates worn bearings.
3. Carefully inspect all front and rear suspension
fasteners for tightness.
57
)