Memory - Chauvin Arnoux HANDSCOPE CA 922 Manual De Instrucciones

DISPlay[:WINDow]:CURSor
:TIME{[1]|2}:POSition
DISPlay[:WINDow]:CURSor
:VOLT{[1]|2}:POSition
MEASure:CURSor:DTIME?
MEASure:CURSor:DVOLT?

36.6. MEMORY

36.6.1. TRACE
MMEMory:STORe:TRACe (Command)
MMEMory:LOAD:TRACe (Command)
TRACe:CATalog
(Command/Query)
The DISP:CURS:TIME{[1]|2}:POS <position|MAX|MIN> command sets the horizontal position of the
selected manual cursor.
This command acts on the manual cursors represented on the screen by the X-Symboles (cursor 1)
and * (cursor 2). The indexes {[1]|2} associated to the TIME key word select the same cursors.
<position> is a value in format NRf, it may be followed or not by a multiple and the unit.
By default the value is expressed in second.
To the question DISP:CURS:TIME{[1]|2}:POS?, the instrument returns the horizontal position of the
selected manual cursor.
Response format:
value in format <NR3> expressed in second.
(Query)
To the question DISP:CURS:VOLT{[1]|2}:POS?, the instrument returns the horizontal position of the
selected manual cursor.
This command acts on the manual cursors represented on the screen by the X-Symboles (cursor 1)
and * (cursor 2). The indexes {[1]|2} associated to the TIME key word select the same cursors.
Response format:
value in format <NR3> expressed in volt.
(Query)
To the question MEAS:CURS:DTIME?, the instrument returns the time delay between cursors 1 and
2.
Response format:
value in format <NR3> expressed in second.
(Query)
To the question MEAS:CURS:DVOLT?, the instrument returns the difference between cursors 1 and
2.
Response format:
value in format <NR3> expressed in volt.
The MMEM:STOR:TRAC <INT{1|2|3}|REF{1|2|3}>, <"TRC"|"TXT"> command generates a ".TRC"
or ".TXT" file from the signal or the indicated reference memory, in the selected file system.
To the question MMEM:STOR:TRAC? The instrument returns the filme nam which has been created.
Response format:
The MMEM:LOAD:TRAC <" trace-xx.TRC"> command reads a trace defined in a ".TRC" file and
affects it to the indicated signal.
trace-xx.TRC : file name at xx takes values from 00 to 99.
(Query)
To the question TRAC:CAT?, the device returns the list of active signals.
# TRAC:CAT?
reply <NL> when no signal is active.
reply INT1 <NL> when only signal 1 is active.
reply INT1,INT3<NL> when signals 1 and 3 are active.
<measured value><NL>
<measured value><NL>
<measured value><NL>
<measured value><NL>
<file name><NL>
87