Technical Data - ProMinent DULCOTEST CGE 2-mA-2 ppm Instrucciones De Servicio

Technical Data

14 Technical Data
Measured
variable Free chlorine and organically bound chlorine
Area of
application Drinking water, swimming pool water and water of a similar quality
Measuring range CGE 2-mA-2 ppm
CGE 2-mA-10 ppm 0.1-10 mg/l
CGE 2-4P-10 ppm
pH range 5.5 - 9.5
Temperature
range 5 - 45 °C,
Temperature compensation
No sharp rises in temperature
Storage
temperature Frost-free between 5 and 50 °C
Resolution Corresponds with the value at the lower end of the measuring range
Max. pressure DLG III A/B:
DGM:
Flow DLG III and DGM in-line probe housing
Cross
sensitivity Bromine, iodine, ozone, ClO
measurement errors
Conductivity
Test water 30 µS/cm - 10.000 µS/cm
Operating life
Membrane cap Typically 1 year depending upon the water quality
Materials Membrane cap:
Electrode adaptor:
Power supply 16 - 24 V DC; min 35 mA at 16 V DC
Output signal 4 - 20 mA (mA-Variant)
0 - 2 V
Enclosure rating IP 65
32
0.02-2.0 mg/l
0.1-10 mg/l
1 bar (free flow)
3 bar (no pressure surges!)
, chloramines and other oxidising agents lead to
2
PPE Electrode holder: PMMA
PVC Electronics: Electronic components
(4P-Variant)
Optimum: 30 l/h
Minimum: 20 l/h
Maximum: 100 l/h
ProMinent ®