3. Operation
Adjusting the steam quantity
Rotary knob (B1)
• If you turn the rotary knob counter-clockwise,
a large quantity of steam is emitted.
• If you turn the rotary knob clockwise, only little
steam is emitted.
Figure 7: Adjusting the steam quantity
Parking the Appliance
• If you interrupt your work for a short period of
time, the extension tube with the attached
nozzle can be inserted into the parking position
(see Figure 8).
Figure 8: Parking position
20 – English
All manuals and user guides at all-guides.com
Refilling Water
If the water in the boiler has been consumed, the
red low-water indicator lamp (B5) lights up.
While the low-water indicator lamp lights up, you
can unpressu-rize the boiler.
• Press the steam switch (C4) on the steam gun
• Unscrew the safety lock (A3) from the
• Turn the appliance off using the switch (A4).
• Fill a maximum of 2 litres of tap water into the
• Screw the safety lock (A3) back onto the
• Wait until the indicator lamp (B4) lights up.
You cannot open the safety lock (A3) as long as
a slight pressure is still present in the boiler.
(C1) until no more steam is emitted. Now, the
boiler of the appliance is unpressurized.
appliance.
A residual amount of steam may be emitted when
you open the safety lock. Be careful when you
open the safety lock, there is the risk of scalds.
boiler. (see page 19: Filling the Boiler with
Water)
If the boiler is hot, there is the risk of scalds as the
water may splash back during the filling process.
appliance, and turn the appliance on using the
switch (A4).
Now, the steam cleaner is ready to work again.
SC 1502