How to Apply the Arm Cuff
7. Adjust the level of the arm cuff to the level of the heart.
•
Keep the level of the arm cuff at the same level as the heart during the measure-
ment.
How to use the Power Source
Warning
Do not use the unit in the place where inflamma-
ble gas, such as highly inflammable anesthetic,
may be generated, or in the high pressure
oxygen room or the oxygen tent.
•
It may cause ignition and explosion.
Do not touch the AC adapter with wet hands.
•
You may suffer electric shock.
Caution
Be sure to use the power supply of 230 VAC.
•
It may cause fire or electric shock.
Do not install or store the unit where it may be
sprayed with water or medication.
•
You may suffer electric shock.
Requests from OMRON
•
If this unit is used concurrently with other unit, be sure
to read the Instruction Manual of the other unit to be
used concurrently and understand the warnings and
cautions before use.
•
Inspect the Buttons to confirm that the unit operates
normally before use.
14
(cont.)
(AC adapter exclusive for this unit)
Connect the AC adapter to the DC jack of the main unit
[1] and the electric outlet [2].
[2]
•
When using an optional battery pack, the AC adapter
functions as the charger also.
[1]