Metabo HPT AC 18DA Instrucciones De Seguridad Y Manual De Instrucciones página 15

(3) While pushing the release button on the main body
to release the lock, pull the rack handle backward to
bring the piston closer to the main-body side. (Fig. 19)
Rack handle
(4) Load the cartridge into the holder. (Fig. 20)
Cartridge
Holder
< Sausages >
(1) Press the release button on the main body to release
the lock, then pull the rack handle backward to bring
the piston closer to the main-body side. (Fig. 19)
(2) Place the sausage in the 600 ml holder and cut the
closed-off portion at the tip. (Fig. 21)
Sausage
Release button
Fig. 19
Rack handle
Fig. 20
600 ml holder
Fig. 21
(3) Combine the holder cap and the nozzle, and attach
them to the holder.
Cut the tip of the nozzle to 3 mm or more before use.
(Fig. 22)
3 mm or larger
Holder cap
< Bucket >
Prepare the sealing material in advance so that it is ready
for use, according to the sealing material's instruction
manual.
(1) Place the tip of the 600 ml holder into the container
that the sealing material is in.
While pressing the release button to unlock, pull
the rack handle to suction up the sealing material.
(Fig. 23)
Rack handle
Bucket
(2) Combine the holder cap and nozzle and attach them
to the holder. Cut the tip of the nozzle to 3 mm or
more before use. (Fig. 22)
NOTE
After suctioning up, lightly wipe any sealing material
that is adhered the edge of the holder before
attaching the holder cap.
English
Nozzle
Fig. 22
Release button
600 ml holder
Fig. 23
15