Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9. Lubrication
Lubricate the following sliding surfaces once a month
to keep the power tool in good operating condition for
a long time (see Fig. 2 and Fig. 3). Use of machine oil
is recommended.
Oil supply points:
○ Rotary portion of hinge
○ Rotary portion of vise assembly
○ Rotary portion of holder (A)
10. Cleaning
Duct
Air gun
Clean the machine, duct and lower guard by blowing
with dry air from an air gun or other tool. (Fig. 40)
Periodically remove chips, dust and other waste
material from the surface of the power tool, especially
from the inside of the lower guard with a damp, soapy
cloth. To avoid a malfunction of the motor, protect it
from contact with oil or water.
Important notice on the batteries for the
metabo HPT cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used
with batteries other than these designated by us, or
when the battery is disassembled and modifi ed (such
as disassembly and replacement of cells or other
internal parts).
Lower guard
Fig. 40
English
31
Publicidad
Tabla de contenido
