Optimus DC-700ETH/T Manual De Instalación página 12

DC-700ETH/T
Note: Access to the installation screen requires administrator user
level. Open the Users menu
default administrator user name and password ("admin", "admin").
Administrator User:
Administrator Password:
4. In the installation structure, you can add the DC-700ETH/T desks to the PA Area, both locally and globally. Right-click on
the PA Area element, place the cursor on
5. The DC-700ETH/T configuration parameters are displayed:
Paging source. Attention: The
been entered and the configuration has been accepted. In this way, the sound source
device_name is automatically created and assigned to this control. When editing the
device, this field will appear with the already assigned sound source.
The sound source will have a priority assigned to it with respect to the rest of the
sound sources in the system. This will be the priority of the live voice announcements
sent from the DC-700ETH/T and the DC-700ETH/T Adhoc pre-recorded messages.
Emergency Password. DC-700ETH/T
Emergency Mode access password.
1234 by default.
Input contacts. Set whether
the DC-700ETH/T has the
CC-700CC accessory module.
Network parameters.
Configuration of the
live voice channel.
Pre-recorded messages
channel configuration.
Configuration of the
music channel of the USB
port for external memory.
Configuration of the music
channel corresponding to
the Playlist of the
DC-700ETH/T.
Configure if the DC-700ETH/T
has the CC-700CA accessory
module. Configure the music
channel corresponding to the
DC-700ETH/T INPUT R and L
connectors.
Activate only if the DC-700ETH/T has the CC-700CA accessory
module. Enables the analog recording output corresponding to
the DC-700ETH/T OUTPUT L and R connectors.
6. Once the parameters have been configured, save the settings. Open the
7. Send the configurations to the equipment. Open the
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
and select Change
admin
admin
Add and click on DC-700ETH/T.
Paging Source field appears once the device name has
Equipment
Configuration and user's manual
User. You can use the
Admin
DC-700ETH/T
password will be necessary to modify the
configuration
DC-700ETH/T itself.
Activate only if the DC-700ETH/T is equipped
with the CC-700ETH accessory module.
Enables the redundant ETH B connection.
File menu
menu and select Send
R+D Department
3. START-UP
Password. Access protection to the
configurations.
parameters from
1234 by default.
and select Save.
configurations.
This
the
12