Optimus DC-700ETH/T Manual De Instalación página 17

DC-700ETH/T
It is possible to configure the level of information that is recorded in each of the log files.
1. Long press and hold on any point in an area free of elements and a circular selection menu will appear.
2. Select Configurations.
3. Enter the administrator password and press OK.
4. Select the OTHER tab.
5. Configure the level of detail of the event and alarm logs recorded by the DC-700ETH/T.
The levels of information available for each type of log, ordered from most to least information (except for the
Log, which can only be enabled or disabled), are as follows:
LEVEL
ALL
+
DEBUG
INFO
WARN
--
ERROR
DISABLED
6. Press SAVE to apply the changes.
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
Maximum detail available.
Log for developers.
Logging of errors, warnings and incidents.
Logging of errors and warnings.
Error log.
The system does not generate the log file.
R+D Department
Configuration and user's manual
Description
3. START-UP
Alarm
17