Optimus DC-700ETH/T Manual De Instalación página 27

DC-700ETH/T
ZONE configured as disconnected from
the installation, or the matrix does not
have the zone configured.
Indicates that the ZONE belongs to the
EMERGENCY MODE. Appears when the
Emergency mode is activated.
Indicates ZONE belonging to
EMERGENCY MODE and selected for
non-emergency mode functionalities.
AUTOZONE button not selected.
Devices preparing to broadcast a pre-
recorded AUTOZONE message.
AUTOZONE button playing GONG.
Stops playback of the AUTOZONE
message.
The zone or group assigned to the
AUTOZONE is disconnected from the
installation, or the matrix does not have
the zone configured.
Loss of IP communication with the audio
matrix controlling the zone or group of
which the AUTOZONE consists.
The zones or group assigned to the
AUTOZONE are not detected.
Zone alarm. May appear next to the
zone selection button. Indicates zone
speaker line error.
Next to a group or auto-zone selection
button, it indicates that there is no IP
connection to the audio matrix that
controls any of the zones that form it.
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
Configuration and user's manual
4.
All the zones of the GROUP are
disconnected by configuration, or the
matrix does not have the zones
configured.
Indicates that the group belongs to the
EMERGENCY MODE. Appears when the
Emergency mode is activated.
Indicates GROUP belonging to the
selected EMERGENCY MODE for non-
emergency mode functionality.
Button assigned to a prerecorded
message.
Devices preparing to broadcast a
prerecorded message.
Pre-recorded message button playing
the pre-warning tone.
Stops playback of the prerecorded
message assigned to the button.
Pre-recorded message not available.
Appears next to the zone or group
selection button Indicating that a
message time schedule is active.
Indicators of the priority level of the
message in progress. They appear next
1 2
to the zone or group selection button.
The levels and colors depend on the
3 ...
Priorities and Sources settings when
configuring the system.
Next to a group selection button, it
indicates that one of the zones in the
group has a speaker line error or one of
the zones in the group is not detected.
Next to a group or autozone selection
button, it indicates any zone that makes
up the group or autozone is off by
configuration, or the matrix does not
have the zone configured.
R+D Department
APPLICATION ICONS AND BUTTONS
27