Sending A Prerecorded Message Using A Message Selection Button - Optimus DC-700ETH/T Manual De Instalación

DC-700ETH/T
The prerecorded message activation button changes appearance following the activation process:
Initial status.
Press to open the message
selection window.
(Select the message
and press PLAY

5.2.2. Sending a prerecorded message using a message selection button

1. Select the zones and/or groups where you want to send the prerecorded message. The green button indicates the
selected zone or group.
2. (OPTIONAL) Activate or deactivate the GONG.
3. Press the button corresponding to the prerecorded message you wish to activate.
4. Press the STOP button if you want to stop the message before it ends.
2. (Optional) Activate or
deactivate the GONG
GONG activated
GONG disabled
The prerecorded message button changes appearance following the activation process:
Initial status.
Press to activate the
prerecorded message
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
Preparing equipment.
).
3 Press the prerecorded
message button
Preparing equipment.
R+D Department
Configuration and user's manual
5. BASIC OPERATIONS
Playing Gong
Message in progress.
(optional).
You can stop it before the end
by pressing this button.
1. Select the zones/groups
Playing Gong
(optional). Message in progress. You can
stop it before the end by
pressing this button.
30