Sending A Prerecorded Message Via An Autozone Button - Optimus DC-700ETH/T Manual De Instalación

Configuration and user's manual
DC-700ETH/T
5. BASIC OPERATIONS

5.2.3. Sending a prerecorded message via an AutoZone button

Press the button corresponding to the AutoZone you want to activate. Pressing it will send the assigned
message to the assigned zones/groups according to the AutoZone settings (see section 3.3.2.6.
Add/Remove AutoZone buttons to an area ).
If you want to stop the message before the end of the message, press the STOP button.
Press the AutoZone
button
The AutoZone button changes appearance following the activation process:
Preparing equipment. Playing Gong
Initial status. Message in progress. You can
(If the AutoZone was
Press to start message stop it before the end by
configured with GONG when
playback. pressing this button.
creating the AutoZone).
Configuration and User Manual. Version 5.2.001 R+D Department
31
DC-700ETH/T.