Dc-700Eth/T User Interface Configuration. Edit Mode; Enable/Disable Edit Mode - Optimus DC-700ETH/T Manual De Instalación

DC-700ETH/T

3.3.2. DC-700ETH/T user interface configuration. Edit mode.

Configure the layout of the graphical elements on the screen, placing the desired zone, group, auto-zone and prerecorded
message buttons in each area. You can also add background images to the areas or change the text color of the selection
buttons.
In order to configure these elements, it is necessary to activate the Edit Mode (see section 3.3.2.1)

3.3.2.1 Enable/Disable Edit Mode


To activate the Edit Mode:
1. Long press and hold on any point in the free element area. A circular selection menu appears.
2. Select Edit.
While the DC-700ETH/T is in Edit Mode, the legend

To deactivate the Edit Mode:
1. Long press and hold on any point in an area free of elements and a circular selection menu will appear.
2. Select Edit.
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
The EDIT MODE legend disappears from the top right of the screen.
ATTENTION:
While in Screen Layout mode it is NOT possible to send messages.
Configuration and user's manual
EDIT MODE appears at the top right of the screen.
R+D Department
3. START-UP
19